view Agrigame Quad Bike Spreader details
Agrigame Quad Bike Autofeeder Spreader for feed, fertiliser or seed.
Features;
2.2 Cubic Foot Poly Hopper.
12v Motor with Variable Speed Controller VSC-10 and on-off Switch.
Stainless Steel Radial 6 Blade Fan.
Material Agitator.
5 to 45 Foot Variable Spread Width.

 
Agrigame Quad Bike Spreader Agrigame Quad Bike Spreader Agrigame Quad Bike Spreader ATVFS Agrigame Quad Bike Autofeeder Spreader for feed fertiliser or seed. Features 2.2 Cubic Foot Poly Hopper. 12v Motor with Variable Speed Controller VSC 10 and on off Switch. Stainless Steel Radial 6 Blade Fan. Material Agitator. 5 to 45 Foot Variable Spread Width. 430173421 £546.00 Available from: Agrigame UK Ltd New
view Solway Quadbike Mobile Feeder details
Features our new high output, high torque UK designed and built 12vdc motor and heavy duty wiring loom.

The new model comes with an updated wiring loom and handle bar switch allowing you to select continuous feeding or pulse feeding for periods of up to 10 seconds. The Solway mobile feeder scatters feed from your atv or quad bike along the length of each feed ride and by planning your entire feed route carefully, you will not only save yourself time, but you will also see your birds become wilder with less wandering, leading to a better spread over the guns.

Used cleaned / sieved feed only, stones and foreign matter will damage your feeder and void your warranty.

The unit has quick release fasteners and does not restrict the addition of a trailer. The hopper is moulded from strong polyethylene with a recommended maximum capacity of 60kg. The lid is designed to be easily tilted, and has an internal bungee and cord retainer, and the spinner has raised rolled edges to prevent spillage. The feeder scatters food in a fourteen foot spread, and although the flow rate is fixed, the feed rate can be controlled by a pushed button on the handlebars. The powerful 12vdc motor runs on the vehicle`s battery, a wiring loom and plugs are provided to fit most agricultural quad bikes. If you are fitting to a non standard vehicle we can make a custom loom at additional cost. Connection must be made to a fused supply 15 amp fuse rating. The feed rate is set based on using clean dry wheat. When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to "spin" for a longer time. It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like, but we can supply a modified version for these large feeds at extra cost, please contact our sales or technical department for more information.

The hopper is attached to the ATV with sturdy aluminium brackets, and can be unclipped and removed in less than thirty seconds.

Important when ordering this item, please specify the make and model of the atv that you plan to use it with, as well as the measurements of the back rack. The back rack of your atv must be made of round tubular steel, the feeder cannot be fixed to the cheaper plastic racks for safety reasons. The back rack must also be parallel sided not tapered or shaped/curved. Fits standard racks 7/8 inch (22mm) round tube 36-42 inches wide or 90 to 108 cms wide. If outside these measurements please consult our technical sales team.

Please check with your atv supplier that your particular machine is suitable to carry the extra loading on the back rack. We only recommend specifically designed agricultural machines of at least 350cc, preferably 4WD. Leisure & sports machines are not suitable, high speed is not required or desirable 10mph max when feeding on level ground. Reduce speed and load on hilly or uneven ground. The Solway machine feeder is designed for OFF ROAD USE ONLY, if you atv is fitted with road legal lighting some adjustment might be required by your ATV Dealer.

Approx. dimensions: 36ins (914mm) wide, 20ins (508mm) deep, 22 ins (558mm) high; height 22ins (558mm) at rear, 18ins (547mm) from rack. lid: 33ins diameter. spinner: 6.25 ins (160mm)
 
Solway Quadbike Mobile Feeder Solway Quadbike Mobile Feeder Solway Quadbike Mobile Feeder FE1301 Features our new high output high torque UK designed and built 12vdc motor and heavy duty wiring loom The new model comes with an updated wiring loom and handle bar switch allowing you to select continuous feeding or pulse feeding for periods of up to 10 seconds The Solway mobile feeder scatters feed from your atv or quad bike along the length of each feed ride and by planning your entire feed route carefully you will not only save yourself time but you will also see your birds become wilder with less wandering leading to a better spread over the guns Used cleaned sieved feed only stones and foreign matter will damage your feeder and void your warranty The unit has quick release fasteners and does not restrict the addition of a trailer The hopper is moulded from strong polyethylene with a recommended maximum capacity of 60kg The lid is designed to be easily tilted and has an internal bungee and cord retainer and the spinner has raised rolled edges to prevent spillage The feeder scatters food in a fourteen foot spread and although the flow rate is fixed the feed rate can be controlled by a pushed button on the handlebars The powerful 12vdc motor runs on the vehicle s battery a wiring loom and plugs are provided to fit most agricultural quad bikes If you are fitting to a non standard vehicle we can make a custom loom at additional cost Connection must be made to a fused supply 15 amp fuse rating The feed rate is set based on using clean dry wheat When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to spin for a longer time It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like but we can supply a modified version for these large feeds at extra cost please contact our sales or technical department for more information The hopper is attached to the ATV with sturdy aluminium brackets and can be unclipped and removed in less than thirty seconds Important when ordering this item please specify the make and model of the atv that you plan to use it with as well as the measurements of the back rack The back rack of your atv must be made of round tubular steel the feeder cannot be fixed to the cheaper plastic racks for safety reasons The back rack must also be parallel sided not tapered or shaped curved Fits standard racks 7 8 inch 22mm round tube 36 42 inches wide or 90 to 108 cms wide If outside these measurements please consult our technical sales team Please check with your atv supplier that your particular machine is suitable to carry the extra loading on the back rack We only recommend specifically designed agricultural machines of at least 350cc preferably 4WD Leisure sports machines are not suitable high speed is not required or desirable 10mph max when feeding on level ground Reduce speed and load on hilly or uneven ground The Solway machine feeder is designed for OFF ROAD USE ONLY if you atv is fitted with road legal lighting some adjustment might be required by your ATV Dealer Approx dimensions 36ins 914mm wide 20ins 508mm deep 22 ins 558mm high height 22ins 558mm at rear 18ins 547mm from rack lid 33ins diameter spinner 6 25 ins 160mm £600.00 Available from: Agrigame UK Ltd New
view Solway Mule Type Mobile Feeder-Spreader details
Features our new high output, high torque UK designed and built 12vdc motor, supplied with an adjustable spread deflector plate and a very basic wiring loom ***

The Solway Mule Feeder is suitable for most UTV`s, Mule, Gator, Kubota etc. If you are intending to fit the machine to some of the plastic bed models such as Polaris Can Am and some of the new Honda range of UTV`s extra strengthening / load bearing plates should be fitted on both sides of the bed by your UTV dealer. It can also be mounted in the load spaces of Landover`s, 4x4`s & pickups.

By scattering feed along the length of each feed ride and planning your entire feed route carefully, you will not only save yourself time, but you will also see your birds become wilder with less flushing, leading to a better spread over the guns.

The Solway Mule Feeder is totally weather proof and designed for constant flexing over rough ground. The unit has quick release fasteners which attach to a fixed plate in the carry space and this unobtrusive panel does not get in the way when the hopper is dismounted. The hopper is moulded from strong polyethylene with a recommended maximum capacity of 200kg. The lid is designed to be easily lifted and the hinged door is fully waterproof. The efficient spinner has raised rolled edges to prevent spillage. The mule feeder scatters food up to a fourteen foot spread, and although the flow rate is fixed, the feed rate can be controlled by a convenient button. Approx. 250g / 0.5lb feed per second based on cleaned dry wheat. The feed rate is set based on using clean dry wheat. When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to "spin" for a longer time. It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like, but we can supply a modified version for these large feeds at extra cost, please contact our sales or technical department for more information.

Used cleaned / sieved feed only, stones and foreign matter will damage your feeder and void your warranty.

The powerful 12vdc high torque motor runs from the vehicle`s battery, via a very basic wiring loom provided with this item, (Does not include switch gear, relay switching or fusing link). Connection must be made to a switched, fused supply 15 amp fuse rating from the vehicle electrical system. We strongly recommend the use of a 20/30 amp fused relay in the circuit to protect the machine and vehicle wiring circuit. We can supply a custom loom to your requirements at additional cost, please contact our sales or technical department for more details. If you are in any doubt about the wiring to your vehicle please contact your ATV/UTV dealer or a qualified auto-electrician.

The utv tail-gate is best removed or in the fully lowered position. If the vehicle has a rear tipping mechanism this must be securely locked in the load carrying position.

We supply a variety of spare and supplementary parts for this item, including aluminium bosses, spinner plates, motors and high output motor housings.

The Solway mule feeder is rohs compliant.

Approx. dimensions: empty weight 40kg (approx.) hopper capacity 200kg max recommended based on dry cleaned wheat. Hopper dimensions 900x900x320mm approx.
 
Solway Mule Type Mobile Feeder-Spreader Solway Mule Type Mobile Feeder-Spreader Solway Mule Type Mobile Feeder Spreader FE1312 Features our new high output high torque UK designed and built 12vdc motor supplied with an adjustable spread deflector plate and a very basic wiring loom The Solway Mule Feeder is suitable for most UTVs Mule Gator Kubota etc If you are intending to fit the machine to some of the plastic bed models such as Polaris Can Am and some of the new Honda range of UTVs extra strengthening load bearing plates should be fitted on both sides of the bed by your UTV dealer It can also be mounted in the load spaces of Landovers 4x4s pickups By scattering feed along the length of each feed ride and planning your entire feed route carefully you will not only save yourself time but you will also see your birds become wilder with less flushing leading to a better spread over the guns The Solway Mule Feeder is totally weather proof and designed for constant flexing over rough ground The unit has quick release fasteners which attach to a fixed plate in the carry space and this unobtrusive panel does not get in the way when the hopper is dismounted The hopper is moulded from strong polyethylene with a recommended maximum capacity of 200kg The lid is designed to be easily lifted and the hinged door is fully waterproof The efficient spinner has raised rolled edges to prevent spillage The mule feeder scatters food up to a fourteen foot spread and although the flow rate is fixed the feed rate can be controlled by a convenient button Approx 250g 0 5lb feed per second based on cleaned dry wheat The feed rate is set based on using clean dry wheat When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to spin for a longer time It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like but we can supply a modified version for these large feeds at extra cost please contact our sales or technical department for more information Used cleaned sieved feed only stones and foreign matter will damage your feeder and void your warranty The powerful 12vdc high torque motor runs from the vehicles battery via a very basic wiring loom provided with this item Does not include switch gear relay switching or fusing link Connection must be made to a switched fused supply 15 amp fuse rating from the vehicle electrical system We strongly recommend the use of a 20 30 amp fused relay in the circuit to protect the machine and vehicle wiring circuit We can supply a custom loom to your requirements at additional cost please contact our sales or technical department for more details If you are in any doubt about the wiring to your vehicle please contact your ATV UTV dealer or a qualified auto electrician The utv tail gate is best removed or in the fully lowered position If the vehicle has a rear tipping mechanism this must be securely locked in the load carrying position We supply a variety of spare and supplementary parts for this item including aluminium bosses spinner plates motors and high output motor housings The Solway mule feeder is rohs compliant Approx dimensions empty weight 40kg approx hopper capacity 200kg max recommended based on dry cleaned wheat Hopper dimensions 900x900x320mm approx £880.00 Available from: Agrigame UK Ltd New
view Solway Feeder Overcentre Clips details
This over centre clip is used to fix the solway mobile feeder to the rack of the ATV. All Solway mobile feeders are supplied with sufficient numbers of these clips, but it could be that a spare is needed. The item is supplied with fixing nuts and bolts. 
Solway Feeder Overcentre Clips Solway Feeder Overcentre Clips Solway Feeder Overcentre Clips FEAM0004 This over centre clip is used to fix the solway mobile feeder to the rack of the ATV All Solway mobile feeders are supplied with sufficient numbers of these clips but it could be that a spare is needed The item is supplied with fixing nuts and bolts £10.50 Available from: Agrigame UK Ltd New
view Solway Automatic/Mobile Feeder Spinner Plate details
This spare spinner plate is a replacement part for Solway Trailfeeder, Solway Mobile Feeder and Solway Mule Feeder. It is made from long lasting steel to cope with heavy use, and comes complete with the two screws needed to fit the plate. We recommended that a locking compound (such as threadlok) be applied to the screws when they are being installed. 
Solway Automatic/Mobile Feeder Spinner Plate Solway Automatic/Mobile Feeder Spinner Plate Solway Automatic Mobile Feeder Spinner Plate FEAM0001 This spare spinner plate is a replacement part for Solway Trailfeeder Solway Mobile Feeder and Solway Mule Feeder It is made from long lasting steel to cope with heavy use and comes complete with the two screws needed to fit the plate We recommended that a locking compound such as threadlok be applied to the screws when they are being installed £33.00 Available from: Agrigame UK Ltd New
view Solway Mule/Trail Feeder Deflector Plate details
Adjustable deflector plate suitable for fitting to either the Solway Trailfeeder or Solway Mule feeder. Directs feed towards left or right, narrow or wide spread. Direct replacement for factory fitted plate. 
Solway Mule/Trail Feeder Deflector Plate Solway Mule/Trail Feeder Deflector Plate Solway Mule Trail Feeder Deflector Plate FEAM0086 Adjustable deflector plate suitable for fitting to either the Solway Trailfeeder or Solway Mule feeder Directs feed towards left or right narrow or wide spread Direct replacement for factory fitted plate £60.00 Available from: Agrigame UK Ltd New
view Mobile Feeder Wiring Loom details
FEATURES RELAY SWITCHING COMPATIBLE WITH SOLWAY FEEDERS HD MOTORS & MACHINES

The HD version comes with an uprated wiring including inline fuse holder and handle bar switch, relay switching allowing you to select continuous or pulse feeding.This loom is standard fitting for most ATV Quad Bikes. A custom made loom to fit MULE or PICKUP type towing machines can be supplied at additional cost, please consult our technical department for more details. Please indicate the type, make and model of towing vehicle when ordering.

This new version wiring loom is suitable for most Solway Mobile Feeders dating back to 1992. Models prior to the end of 2016 will require adapting to fit your older machine, please contact our sales office for details and additional cost. Please quote the feeder model number, serial number and date code when ordering.

Since January 2017 the new type of loom with new switch gear has been supplied with ATV mobile & trail feeders 1308, & 1311. This loom can be fitted to older machines but requires the "S" type plug to connect to the feeder. The older type round black bulkhead 3 pin plug and socket are now obsolete. Please contact our sales office to confirm your requirements before ordering. Suitable for SOLWAY FEEDERS OEM machines only.


Fitting the new type SOLWAY loom to your ATV

Remove sufficient body panels to enable an easy route for the cable.

Ensure it fits fairly loosely with plenty of spare cable at the switch end allowing for the movement of the handlebars and controls and battery box end. The cable can be clipped or tied to the frame of the atv but make sure it is clear of any hot parts of the engine or exhaust system.

The switch is prewired and connected to the loom and only re-quires mounting on the left hand side handlebar as close to the other controls as possible.

The other end of the loom connects to the battery with the ring connectors provided. The fuse link wire connects to the Positive terminal and the plain end ring to the Negative terminal.

Connect the 7 pin Grey “S” type plug to the feeder “S” type socket and check the operation of the feeder motor. Press the top red switch into the on position. For continuous feed use the mid grey switch. For intermittent / pulse feed use the lower red push button . When not in use turn off the top red switch

Refit and secure all bodywork panels and recheck operation.

JANUARY 2017 
Mobile Feeder Wiring Loom Mobile Feeder Wiring Loom Mobile Feeder Wiring Loom FEAM0002 FEATURES RELAY SWITCHING COMPATIBLE WITH SOLWAY FEEDERS HD MOTORS MACHINES The HD version comes with an uprated wiring including inline fuse holder and handle bar switch relay switching allowing you to select continuous or pulse feeding This loom is standard fitting for most ATV Quad Bikes A custom made loom to fit MULE or PICKUP type towing machines can be supplied at additional cost please consult our technical department for more details Please indicate the type make and model of towing vehicle when ordering This new version wiring loom is suitable for most Solway Mobile Feeders dating back to 1992 Models prior to the end of 2016 will require adapting to fit your older machine please contact our sales office for details and additional cost Please quote the feeder model number serial number and date code when ordering Since January 2017 the new type of loom with new switch gear has been supplied with ATV mobile trail feeders 1308 1311 This loom can be fitted to older machines but requires the S type plug to connect to the feeder The older type round black bulkhead 3 pin plug and socket are now obsolete Please contact our sales office to confirm your requirements before ordering Suitable for SOLWAY FEEDERS OEM machines only Fitting the new type SOLWAY loom to your ATV Remove sufficient body panels to enable an easy route for the cable Ensure it fits fairly loosely with plenty of spare cable at the switch end allowing for the movement of the handlebars and controls and battery box end The cable can be clipped or tied to the frame of the atv but make sure it is clear of any hot parts of the engine or exhaust system The switch is prewired and connected to the loom and only re quires mounting on the left hand side handlebar as close to the other controls as possible The other end of the loom connects to the battery with the ring connectors provided The fuse link wire connects to the Positive terminal and the plain end ring to the Negative terminal Connect the 7 pin Grey S type plug to the feeder S type socket and check the operation of the feeder motor Press the top red switch into the on position For continuous feed use the mid grey switch For intermittent pulse feed use the lower red push button When not in use turn off the top red switch Refit and secure all bodywork panels and recheck operation JANUARY 2017 £87.50 Available from: Agrigame UK Ltd New
view Solway Automatic/Mobile Feeder Motor details
This assembly can be retro-fitted to most feeders back to 2000 and in some cases a modified version can be made to fit machines back to 1992. Please specify the model and year of your machine when ordering. Comes complete with alloy boss. New mount features anti-vibration system as standard.

The feed rate is set based on using clean dry wheat. When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced. If you are using this motor in a static /automatic feeder this may require increasing the feed period setting. If you are using it for any of the mobile feeders you may need to "spin" for a longer time. It is not recommended for larger kernal such as whole maize of large sunflower seeds or the like, but we can supply a modified version for these large feeds at extra cost, please contact our sales or technical department for more information.

Please ensure these motors are connected with the correct battery polarity and have the correctly rated fuse in line 15amp.
 
Solway Automatic/Mobile Feeder Motor Solway Automatic/Mobile Feeder Motor Solway Automatic Mobile Feeder Motor FEAM0005 This assembly can be retro fitted to most feeders back to 2000 and in some cases a modified version can be made to fit machines back to 1992 Please specify the model and year of your machine when ordering Comes complete with alloy boss New mount features anti vibration system as standard The feed rate is set based on using clean dry wheat When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced If you are using this motor in a static automatic feeder this may require increasing the feed period setting If you are using it for any of the mobile feeders you may need to spin for a longer time It is not recommended for larger kernal such as whole maize of large sunflower seeds or the like but we can supply a modified version for these large feeds at extra cost please contact our sales or technical department for more information Please ensure these motors are connected with the correct battery polarity and have the correctly rated fuse in line 15amp £149.50 Available from: Agrigame UK Ltd New
Stub Axle
91.50
view Stub Axle details
ADR replacement stub axle for the Solway Trailfeeder. Can be fitted to most models from 2000 There is a four hole mounting bracket welded onto one end, which makes fitting a stub axle to a chassis easy. The pcd of the hub bolts is 100mm. Sold as a single unit. These units have sealed pre-lubricated bearings, however they do require regular maintainence and adjustment of the end float to ensure long life and it is recommended that you re-pack the hubs with fresh clean grease at least every three months. Failure to service, lubricate & adjust the bearings will void the warranty.

This axle is rated for offroad use only. Wheel bearings and maintainence when the stub axle is delivered the wheel bearings are not run in. After the first 12hrs of use the bearings must be checked and adjusted as follows: while rotating the wheel tighten the castle nut until there is a slight bind and all bearing surfaces are in contact. Then back off the castle nut 1/8 of a turn to the nearest locking hole. The wheel should rotate freely with 0.002-0.008 inch of play or end float. Lock the castle nut in place with a new split pin. Failure to replace this pin may cause the wheel & hub to come off the axle! Fresh clean grease should be applied via the grease nipple fitted or worked in by hand on the semi-sealed type. Models from February 2013 are fitted with semi-sealed pre-lubricated bearings. Do not over fill with grease as this will push off the hub-caps. Repeat for the other wheel. Ensure the hub caps are securely re-fitted. The wheel bearings must be checked and adjusted again at 100hr or one month interval whichever is sooner. It is recommended that at three month intervals the hubs are repacked with fresh clean grease and adjusted as above.
 
Stub Axle Stub Axle Stub Axle ADR replacement stub axle for the Solway Trailfeeder Can be fitted to most models from 2000 There is a four hole mounting bracket welded onto one end which makes fitting a stub axle to a chassis easy The pcd of the hub bolts is 100mm Sold as a single unit These units have sealed pre lubricated bearings however they do require regular maintainence and adjustment of the end float to ensure long life and it is recommended that you re pack the hubs with fresh clean grease at least every three months Failure to service lubricate adjust the bearings will void the warranty This axle is rated for offroad use only Wheel bearings and maintainence when the stub axle is delivered the wheel bearings are not run in After the first 12hrs of use the bearings must be checked and adjusted as follows while rotating the wheel tighten the castle nut until there is a slight bind and all bearing surfaces are in contact Then back off the castle nut 1 8 of a turn to the nearest locking hole The wheel should rotate freely with 0 002 0 008 inch of play or end float Lock the castle nut in place with a new split pin Failure to replace this pin may cause the wheel hub to come off the axle Fresh clean grease should be applied via the grease nipple fitted or worked in by hand on the semi sealed type Models from February 2013 are fitted with semi sealed pre lubricated bearings Do not over fill with grease as this will push off the hub caps Repeat for the other wheel Ensure the hub caps are securely re fitted The wheel bearings must be checked and adjusted again at 100hr or one month interval whichever is sooner It is recommended that at three month intervals the hubs are repacked with fresh clean grease and adjusted as above £91.50 Available from: Agrigame UK Ltd New
view Solway Trailed Feeder details
Features our new high output, high torque UK designed and built 12vdc motor, heavy duty wiring loom and adjustable spread deflector plate.

This is a Solway Feeders designed machine which can be filled with pellets, wheat, barley or a mixture and towed behind an ATV, UTV or Land Rover Pickup type vehicle. The standard wiring loom supplied fits most ATV quad bikes, other looms are available at extra cost, please specify towing vehicle when ordering.

Please be aware this trailer is for off-road use only, max speed 10mph

The driver controls the release of feed by a switch connected to the wiring loom, and a spinner plate underneath the machine scatters the feed behind. Maximum speed must be less than 10mph. By scattering feed along the length of each feed ride and by planning your entire feed route carefully, you will not only save time, but you will also see your birds become wilder with less wandering and a better spread over the guns. The strong polyethylene hopper is totally weather proof and designed to flex over rough ground. The hopper has a recommended maximum capacity of 200kg, and is easily filled through the hinged, waterproof lid. A lesser feed weight and volume is recommended when traversing hilly or uneven ground. The 160mm spinning plate has raised edges to prevent spillages.The galvanised steel chassis and flexible mudguards are robust and long lasting.

The entire unit can be easily hooked up to a trailer hitch with standard 50mm ball hitch fittings. The feed rate is set based on using clean dry wheat. When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to "spin" for a longer time. It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like, but we can supply a modified version for these large feeds at extra cost, please contact our sales or technical department for more information.

Used cleaned / sieved feed only, stones and foreign matter will damage your feeder and void your warranty.

The model is powered by a new UK made Solway spec 12vdc high torque high capacity motor which runs off your vehicle`s battery, featuring the new uprated looms fitted with power relay switching. We supply as standard the wiring and plugs to fit most ATV agricultural quad bikes. If you are using another type of towing vehicle utv, mule, pick-up truck or land rover etc. please specify when ordering as a different wiring loom may be available, at additional cost, contact our sales or technical team for more details. All electrical connections must be made via a 15amp inline fuse.

We stock a wide variety of spare and supplementary items for this unit, including spinner plates, motors, stub axles, wheels and tyres, tow hitches, etc.

FEED RATE approx. 250g /0.5lb feed per second based on cleaned dry wheat, controlled by a simple push button switch, and casts a wide fourteen foot spread of food.

Approx. dimensions: empty weight 150kg. Hopper capacity 200kg. Max gross weight 350kg Hopper dimensions 900x900x320mm. Overall width ( inc wheels ) 1480mm Overall height 1000mm overall length 1800mm ground clearance 345mm
 
Solway Trailed Feeder Solway Trailed Feeder Solway Trailed Feeder FE1311 Features our new high output high torque UK designed and built 12vdc motor heavy duty wiring loom and adjustable spread deflector plate This is a Solway Feeders designed machine which can be filled with pellets wheat barley or a mixture and towed behind an ATV UTV or Land Rover Pickup type vehicle The standard wiring loom supplied fits most ATV quad bikes other looms are available at extra cost please specify towing vehicle when ordering Please be aware this trailer is for off road use only max speed 10mph The driver controls the release of feed by a switch connected to the wiring loom and a spinner plate underneath the machine scatters the feed behind Maximum speed must be less than 10mph By scattering feed along the length of each feed ride and by planning your entire feed route carefully you will not only save time but you will also see your birds become wilder with less wandering and a better spread over the guns The strong polyethylene hopper is totally weather proof and designed to flex over rough ground The hopper has a recommended maximum capacity of 200kg and is easily filled through the hinged waterproof lid A lesser feed weight and volume is recommended when traversing hilly or uneven ground The 160mm spinning plate has raised edges to prevent spillages The galvanised steel chassis and flexible mudguards are robust and long lasting The entire unit can be easily hooked up to a trailer hitch with standard 50mm ball hitch fittings The feed rate is set based on using clean dry wheat When feeding pellets or a mixture of pellets and wheat the feed rate will be reduced and you may need to spin for a longer time It is not recommended for larger kernel such as whole maize of large sunflower seeds or the like but we can supply a modified version for these large feeds at extra cost please contact our sales or technical department for more information Used cleaned sieved feed only stones and foreign matter will damage your feeder and void your warranty The model is powered by a new UK made Solway spec 12vdc high torque high capacity motor which runs off your vehicle s battery featuring the new uprated looms fitted with power relay switching We supply as standard the wiring and plugs to fit most ATV agricultural quad bikes If you are using another type of towing vehicle utv mule pick up truck or land rover etc please specify when ordering as a different wiring loom may be available at additional cost contact our sales or technical team for more details All electrical connections must be made via a 15amp inline fuse We stock a wide variety of spare and supplementary items for this unit including spinner plates motors stub axles wheels and tyres tow hitches etc FEED RATE approx 250g 0 5lb feed per second based on cleaned dry wheat controlled by a simple push button switch and casts a wide fourteen foot spread of food Approx dimensions empty weight 150kg Hopper capacity 200kg Max gross weight 350kg Hopper dimensions 900x900x320mm Overall width inc wheels 1480mm Overall height 1000mm overall length 1800mm ground clearance 345mm £1550.00 Available from: Agrigame UK Ltd New
view ATV Sprayer details
95 Litre Silver Spot Series Sprayer.
Comes complete with hose,lance,drain plug,plug kit & straps. Has a 7.7l/min 60psi pump.

Dimensions: L 950mm x W 620mm x H 660mm.

N.B Does not come with boom. 
ATV Sprayer ATV Sprayer ATV Sprayer ATV131022 95 Litre Silver Spot Series Sprayer Comes complete with hose lance drain plug plug kit straps Has a 7 7l min 60psi pump Dimensions L 950mm x W 620mm x H 660mm N B Does not come with boom £0.00 Available from: Agrigame UK Ltd New
view ATV Sprayer Booms details
The Silver Series Sprayer Booms are available in the folling sizes;
2m Folding Boom c/w ATV mounting kit.
3m Folding Boom c/w ATV mounting kit.
4m Folding Boom c/w ATV mounting kit. 

£108.00
View options
ATV Sprayer Booms ATV Sprayer Booms ATV Sprayer Booms ATV The Silver Series Sprayer Booms are available in the folling sizes 2m Folding Boom c w ATV mounting kit 3m Folding Boom c w ATV mounting kit 4m Folding Boom c w ATV mounting kit £108.00 Available from: Agrigame UK Ltd New
view Mule Sprayer details
225 Litre Silver Series Mule Sprayer.
Comes complete with hose,lance,drain plug & plug kit.
Has a 7.7l/min 60psi pump.

Dimensions L 1040mm x W 650mm x H 700mm.

N.B Does not come with boom. 
Mule Sprayer Mule Sprayer Mule Sprayer ATV132122 225 Litre Silver Series Mule Sprayer Comes complete with hose lance drain plug plug kit Has a 7 7l min 60psi pump Dimensions L 1040mm x W 650mm x H 700mm N B Does not come with boom £0.00 Available from: Agrigame UK Ltd New
view Mule Sprayer Booms details
The Silver Series Sprayer Booms are available in the following sizes;
3m Folding Boom.
4m Folding Boom. 

£240.00
View options
Mule Sprayer Booms Mule Sprayer Booms Mule Sprayer Booms ATV The Silver Series Sprayer Booms are available in the following sizes 3m Folding Boom 4m Folding Boom £240.00 Available from: Agrigame UK Ltd New
Versatile Spray Boom Versatile Spray Boom Versatile Spray Boom ATV £0.00 Available from: Agrigame UK Ltd New
Arisun ATV Tyres Arisun ATV Tyres Arisun ATV Tyres ATV £0.00 Available from: Agrigame UK Ltd New
Artrax ATV Tyres Artrax ATV Tyres Artrax ATV Tyres ATV £0.00 Available from: Agrigame UK Ltd New
view Deli Maxi Grip ATV Tyre details
  • MAXI GRIP SG789 Benefits
  • • Cleats are spaced further apart to give a bigger bite
  • • Cleat treads are deeper but still flexible so that clay and mud can be cleared with a flick of the throttle
  • • Tread rubber is tougher and more durable
  • • Easier to fit to rims
All new ATV tyre with aggressive tread pattern designed for maximum grip in UK & Irish conditions. 
Deli Maxi Grip ATV Tyre Deli Maxi Grip ATV Tyre Deli Maxi Grip ATV Tyre ATV400 All new ATV tyre with aggressive tread pattern designed for maximum grip in UK Irish conditions MAXI GRIP SG789 Benefits Cleats are spaced further apart to give a bigger bite Cleat treads are deeper but still flexible so that clay and mud can be cleared with a flick of the throttle Tread rubber is tougher and more durable Easier to fit to rims £0.00 Available from: Agrigame UK Ltd New
view Innova ATV Tyres details
A selection of tyres are available to suit most ATV`s. Other sizes of tyres are stocked subject to availablity. Tyres can be sent directly to your farm or estate & come packed & ready to fit. 
Innova ATV Tyres Innova ATV Tyres Innova ATV Tyres ATV400 0 A selection of tyres are available to suit most ATV s Other sizes of tyres are stocked subject to availablity Tyres can be sent directly to your farm or estate come packed ready to fit £0.00 Available from: Agrigame UK Ltd New
ATV Tubes
999999
view ATV Tubes details
We can supply tubes for most size tyres. 
ATV Tubes ATV Tubes ATV Tubes ATV410. We can supply tubes for most size tyres. 430173421 £0.00 Available from: Agrigame UK Ltd New
view DIY Puncture Repair Kit details
No need to remove the tyre from the rim!
Contains: all necessary tools & enough strings for seven puntures. 
DIY Puncture Repair Kit DIY Puncture Repair Kit DIY Puncture Repair Kit ATVPRK No need to remove the tyre from the rim Contains all necessary tools enough strings for seven puntures £8.85 Available from: Agrigame UK Ltd New
Tyre Puncture Preventer Tyre Puncture Preventer Tyre Puncture Preventer ATVTPP 483cc bottle £10.10 Available from: Agrigame UK Ltd New
view Replacement Strings details
Replacement string box of 50. 
Replacement Strings Replacement Strings Replacement Strings ATVRS Replacement string box of 50 £10.75 Available from: Agrigame UK Ltd New
Tow Ball
26.90
view Tow Ball details
Tough & durable universal tow ball - 50mm. 
Tow Ball Tow Ball Tow Ball ATVTB Tough durable universal tow ball 50mm £26.90 Available from: Agrigame UK Ltd New
view 50mm Trailer Coupling details
50mm Coupling
Pressed Steel
Capacity up to 750kg 
50mm Trailer Coupling 50mm Trailer Coupling 50mm Trailer Coupling AGMP80 50mm Coupling Pressed Steel Capacity up to 750kg £27.00 Available from: Agrigame UK Ltd New
view ATV Mud Flap Kit details
can be fitted to any ATV & provides protection from mud or stone splatter. 
ATV Mud Flap Kit ATV Mud Flap Kit ATV Mud Flap Kit ATVMFK can be fitted to any ATV provides protection from mud or stone splatter £37.00 Available from: Agrigame UK Ltd New
view Hub & Stub Wheel Kit details
Converts an old trailer into a functional quad trailer/game cart.
Contains; 1 x (22 x 11 x 8) tyre,rim 100PCD,1 x hub stub kit with 35mm square shaft. 
Hub & Stub Wheel Kit Hub & Stub Wheel Kit Hub Stub Wheel Kit ATV415 0005 Converts an old trailer into a functional quad trailer game cart Contains 1 x 22 x 11 x 8 tyre rim 100PCD 1 x hub stub kit with 35mm square shaft £159.60 Available from: Agrigame UK Ltd New
view Tax Disc Holder details
For road legal ATV`s or UTV`s. 
Tax Disc Holder Tax Disc Holder Tax Disc Holder ATVTDH For road legal ATV s or UTV s £1.70 Available from: Agrigame UK Ltd New
view Wing Mirror & Mount details
Swivel head for left or right use.
c/w universal 10mm mirror mount. 
Wing Mirror & Mount Wing Mirror & Mount Wing Mirror Mount ATV120 0230 0220 Swivel head for left or right use c w universal 10mm mirror mount £12.00 Available from: Agrigame UK Ltd New
view Handlebar Mittens details
To keep hands extra warm on chilly days with specially fitted handlebar mittens. 

£29.40
View options
Handlebar Mittens Handlebar Mittens Handlebar Mittens ATVHBM To keep hands extra warm on chilly days with specially fitted handlebar mittens £29.40 Available from: Agrigame UK Ltd New
view Kolpin Gun Grips details
Design provides superior gripping power & cushioning support that reduces side to side movement, strong,flexible static grips 7 rubber straps with a universal design & easy installation. 
Kolpin Gun Grips Kolpin Gun Grips Kolpin Gun Grips ATVFG Design provides superior gripping power cushioning support that reduces side to side movement strong flexible static grips 7 rubber straps with a universal design easy installation £53.80 Available from: Agrigame UK Ltd New
view Heated Handlebar Grips details
Complete with thumb warmer & two heat settings. Perfect accompaniment to the mittens in winnter months. 
Heated Handlebar Grips Heated Handlebar Grips Heated Handlebar Grips ATVHHG Complete with thumb warmer two heat settings Perfect accompaniment to the mittens in winnter months £78.55 Available from: Agrigame UK Ltd New
view ATV Dog Mat details
ATV Dog Mat is a solid ATV mounting mat that provides stable footing for dogs, and a non-slip base for other loads while protecting your ATV.
Specifications
Length: 1200mm
Width: 520mm
Thickness: 18mm thick rubber
Weight: 14kg
 
ATV Dog Mat ATV Dog Mat ATV Dog Mat ATV120 71655 ATV Dog Mat is a solid ATV mounting mat that provides stable footing for dogs and a non slip base for other loads while protecting your ATV Specifications Length 1200mm Width 520mm Thickness 18mm thick rubber Weight 14kg £46.95 Available from: Agrigame UK Ltd New
view ATV/UTV LED Light Bar details
All lights have a combo pattern of both flood lights and spot lights.
Can be used with a separate switch or can be wired into the main beam lights of your vehicle.

Small LED light bar - 72w, 12v, 5760 LM, 386mm x 87mm x 81mm.
Medium LED light bar - 120w, 12v, 9600 LM, 593mm x 87mm x 81mm.
Large LED light bar- 240w, 12v, 19200 LM, 1103mm x 87mm x 81mm. 

£50.40
View options
ATV/UTV LED Light Bar ATV/UTV LED Light Bar ATV UTV LED Light Bar ATV All lights have a combo pattern of both flood lights and spot lights Can be used with a separate switch or can be wired into the main beam lights of your vehicle Small LED light bar 72w 12v 5760 LM 386mm x 87mm x 81mm Medium LED light bar 120w 12v 9600 LM 593mm x 87mm x 81mm Large LED light bar 240w 12v 19200 LM 1103mm x 87mm x 81mm £50.40 Available from: Agrigame UK Ltd New
view ATV/UTV LED Light Bar Wiring Loom details
LED light bar wiring loom, designed to suit any LED light bars. 
ATV/UTV LED Light Bar Wiring Loom ATV/UTV LED Light Bar Wiring Loom ATV UTV LED Light Bar Wiring Loom ATV LED light bar wiring loom designed to suit any LED light bars £25.20 Available from: Agrigame UK Ltd New
view UTV Gamemate Large details
GAMEMATE is a purpose built tool designed to carry approximately 100 brace of game/wildfowl.
Keeps game dry and allows to cool.
Easy to assemble.
Hard wearing powder coated finish.
Hinged, gas assisted cover.
630GSM Durable, long lasting PVC cover.
Fits most Utility Vehicles, base size 1200mm wide 1000mm deep.

We can also supply custom made sizes for UTV’s, trucks and trailers.
 
UTV Gamemate Large UTV Gamemate Large UTV Gamemate Large ATVGMC GAMEMATE is a purpose built tool designed to carry approximately 100 brace of game wildfowl Keeps game dry and allows to cool Easy to assemble Hard wearing powder coated finish Hinged gas assisted cover 630GSM Durable long lasting PVC cover Fits most Utility Vehicles base size 1200mm wide 1000mm deep We can also supply custom made sizes for UTV s trucks and trailers £720.00 Available from: Agrigame UK Ltd New
view ATV & UTV Air Filters details
We can supply air filters for most makes of ATV or UTV`s. 
ATV & UTV Air Filters ATV & UTV Air Filters ATV UTV Air Filters ATV We can supply air filters for most makes of ATV or UTV s £0.00 Available from: Agrigame UK Ltd New
view ATV & UTV Oil Filters details
We can supply oil filters for most makes of ATV or UTV`s. 
ATV & UTV Oil Filters ATV & UTV Oil Filters ATV UTV Oil Filters ATV We can supply oil filters for most makes of ATV or UTV s £0.00 Available from: Agrigame UK Ltd New
view ATV & UTV Fuel Filters details
We can supply fuel filters for most makes of ATV or UTV`s. 
ATV & UTV Fuel Filters ATV & UTV Fuel Filters ATV UTV Fuel Filters ATV We can supply fuel filters for most makes of ATV or UTV s £0.00 Available from: Agrigame UK Ltd New
view ATV Spark Plugs details
We can supply spark plugs for most makes of ATV`s. 
ATV Spark Plugs ATV Spark Plugs ATV Spark Plugs ATV We can supply spark plugs for most makes of ATV s £0.00 Available from: Agrigame UK Ltd New
view ATV Batteries details
Batteries are available for most ATV`s including Artic-Cat,Honda,Kawasaki,Suzuki & Yamaha.All batteries are covered by a twelve month manufacturer`s warranty.Batteries come with acid packs. 
ATV Batteries ATV Batteries ATV Batteries ATV Batteries are available for most ATV s including Artic Cat Honda Kawasaki Suzuki Yamaha All batteries are covered by a twelve month manufacturer s warranty Batteries come with acid packs £0.00 Available from: Agrigame UK Ltd New
view ATV Bearings details
We are able to provide an assortment of standard bearings,wheel/seal kits & differential kits to fit most models.Just call with the model of the ATV & we will be able to provide you with a competitive price for the part you require. 
ATV Bearings ATV Bearings ATV Bearings ATV We are able to provide an assortment of standard bearings wheel seal kits differential kits to fit most models Just call with the model of the ATV we will be able to provide you with a competitive price for the part you require £0.00 Available from: Agrigame UK Ltd New
view ATV & UTV Brake Pads details
We can supply brake pads for most makes of ATV and UTV`s. 
ATV & UTV Brake Pads ATV & UTV Brake Pads ATV UTV Brake Pads ATV We can supply brake pads for most makes of ATV and UTV s £0.00 Available from: Agrigame UK Ltd New
view ATV & UTV Brake Shoes details
We can supply brake shoes for most makes of ATV and UTV`s. 
ATV & UTV Brake Shoes ATV & UTV Brake Shoes ATV UTV Brake Shoes ATV We can supply brake shoes for most makes of ATV and UTV s £0.00 Available from: Agrigame UK Ltd New
view ATV Tail Light Kits details
We are able to supply replacement lights for most models,however due to the vast array of ATV`s,please call with your model type for a competitive quote. 
ATV Tail Light Kits ATV Tail Light Kits ATV Tail Light Kits ATV We are able to supply replacement lights for most models however due to the vast array of ATV s please call with your model type for a competitive quote £0.00 Available from: Agrigame UK Ltd New
view ATV Covers details
Keep your machine clean & dust free with a large cover.
Fits ATV`s up to 83" long, 45" wide, 38" High. 
ATV Covers ATV Covers ATV Covers ATV Keep your machine clean dust free with a large cover Fits ATV s up to 83 long 45 wide 38 High £70.60 Available from: Agrigame UK Ltd New
view Seat Covers details
Seat Over Cover - Universal Deluxe Cover (Classic Accessories) ProtekX Fabric - Quickly fits to seat with adjustable click-close bottom straps, Elasticized hem for a quick and close fit. Machine Washable.

Also available over covers and vinyl staple on replacement covers. Available for most models. 
Seat Covers Seat Covers Seat Covers ATV Seat Over Cover Universal Deluxe Cover Classic Accessories ProtekX Fabric Quickly fits to seat with adjustable click close bottom straps Elasticized hem for a quick and close fit Machine Washable Also available over covers and vinyl staple on replacement covers Available for most models £0.00 Available from: Agrigame UK Ltd New
view Alpina C25 Top Handle Chainsaw details
  • Specification
  • Displacement: 25.4cc
  • Power Source: Petrol 2 Stroke
  • Power: 0.9kw
  • Bar inches: 10`-25cm
  • Bar: cm 25
  • 38` 0.50`: (91pj-40x)
  • Oil pump: Automatic ADJ
  • Net weight: 3.6 kgs
  • Noise Power Level: 110db
C25
Ideal for pruning operations thanks to its light weight optimally balanced, the Alpina C 25 pruning chain saw is powered by a 25.4cc, 2-stroke engine and provided with a 10"/25 cm bar, automatic adjustable oil pump and chain tensioning adjustable by side tensioner tool included.
A.V.S.
The anti-vibration system, using shock absorbent materials, isolates the operator from vibrations produced by engine and cutting system. The benefits are less fatigue stress on arms and hands and a more comfortable working operation
Double chain brake
In case of kickback, the double braking system is able to stop the chain in a fraction of a second. The inertial device automatically stops the chain speed in case of improper contact while the manual brake is easily activated by operator`s hand on the safety guard
Low emissions
New modern engine technology allows to decrease fuel consumption and reduce exhaust emission levels accordingly with current environmental regulations
Primer
Primer bulb instantly gives the first fuel flow to the carburettor allowing a quick start, even after a long engine stop
Side chain tensioner
Placed on the machine side, it allows to reach the chain housing with a simple tool and keep the tensioning avoiding any contact with the saw chain

 
Alpina C25 Top Handle Chainsaw Alpina C25 Top Handle Chainsaw Alpina C25 Top Handle Chainsaw AGRALPC25CS C25 Ideal for pruning operations thanks to its light weight optimally balanced the Alpina C 25 pruning chain saw is powered by a 25 4cc 2 stroke engine and provided with a 10 25 cm bar automatic adjustable oil pump and chain tensioning adjustable by side tensioner tool included A V S The anti vibration system using shock absorbent materials isolates the operator from vibrations produced by engine and cutting system The benefits are less fatigue stress on arms and hands and a more comfortable working operation Double chain brake In case of kickback the double braking system is able to stop the chain in a fraction of a second The inertial device automatically stops the chain speed in case of improper contact while the manual brake is easily activated by operator s hand on the safety guard Low emissions New modern engine technology allows to decrease fuel consumption and reduce exhaust emission levels accordingly with current environmental regulations Primer Primer bulb instantly gives the first fuel flow to the carburettor allowing a quick start even after a long engine stop Side chain tensioner Placed on the machine side it allows to reach the chain housing with a simple tool and keep the tensioning avoiding any contact with the saw chain Specification Displacement 25 4cc Power Source Petrol 2 Stroke Power 0 9kw Bar inches 10 25cm Bar cm 25 38 0 50 91pj 40x Oil pump Automatic ADJ Net weight 3 6 kgs Noise Power Level 110db £159.00 Available from: Agrigame UK Ltd New
view Greatland GL38/40 Chainsaw details
Engine: 37.2cc
Power: 1.3kW
Bar Length: 16" Oregon
Chain: Oregon 3/8" low profile chain pitch

Electronic Ignition, Automatic Chain Lubrication, Automatic Chain Brake 
Greatland GL38/40 Chainsaw Greatland GL38/40 Chainsaw Greatland GL38 40 Chainsaw AGRGL38 40CS Engine 37 2cc Power 1 3kW Bar Length 16 Oregon Chain Oregon 3 8 low profile chain pitch Electronic Ignition Automatic Chain Lubrication Automatic Chain Brake £149.90 Available from: Agrigame UK Ltd New
view Alpina C38 Chainsaw details
  • Specification
  • Displacement: 37.2cc
  • Power Source: Petrol 2 Stroke
  • Bar Length: 35cm14 inches
  • Starter: Easy start recoil
  • Engine Net Power: 1.2kW
  • Bar Type: Sprocket Nose
  • Fuel Tank Capacity: 0.4 Litres
  • Handle Type: Rear Handle
C38

Take on the home tasks with the Alpina C 38 petrol chain saw. Powered by a 37.2 cc, 2-stroke engine with Easy Start device and provided with 16"/40 cm bar, automatic adjustable oil pump and chain tensioning by side screw tensioner tool included.

Maximum safety is granted by the manual and inertial chain brake, while you can easily access to air filter and engine spark plug without any tool.

A.V.S.

The anti-vibration system, using shock absorbent materials, isolates the operator from vibrations produced by engine and cutting system. The benefits are less fatigue stress on arms and hands and a more comfortable working operation

Double chain brake

In case of kickback, the double braking system is able to stop the chain in a fraction of a second. The inertial device automatically stops the chain speed in case of inproper contact while the manual brake is easily activated by operator`s hand on the safety guard

Easy start system

The innovative starting system reduces up to 30% the resistance in the starter cord. The result is a faster and incredibly comfortable way to begin the work

Low emissions

New modern engine technolgy allows to decrease fuel consupmtion and reduce exhaust emission levels accordingly with current environmental regulations

Primer

Primer bulb instantly gives the first fuel flow to the carburettor allowing a quick start, even after a long engine stop

Side chain tensioner

Placed on the machine side, it allows to reach the chain housing with a simple tool and keep the tensioning avoiding any contact with the saw chain

Softgrip handle

Softgrip is a special rubber which protect the handle where it get holded while the machine is in use. Absorbing part of the vibrations while augmenting the grip it makes more comfortable the use of your machine.
 
Alpina C38 Chainsaw Alpina C38 Chainsaw Alpina C38 Chainsaw AGRALPC38CS C38 Take on the home tasks with the Alpina C 38 petrol chain saw Powered by a 37 2 cc 2 stroke engine with Easy Start device and provided with 16 40 cm bar automatic adjustable oil pump and chain tensioning by side screw tensioner tool included Maximum safety is granted by the manual and inertial chain brake while you can easily access to air filter and engine spark plug without any tool A V S The anti vibration system using shock absorbent materials isolates the operator from vibrations produced by engine and cutting system The benefits are less fatigue stress on arms and hands and a more comfortable working operation Double chain brake In case of kickback the double braking system is able to stop the chain in a fraction of a second The inertial device automatically stops the chain speed in case of inproper contact while the manual brake is easily activated by operator s hand on the safety guard Easy start system The innovative starting system reduces up to 30 the resistance in the starter cord The result is a faster and incredibly comfortable way to begin the work Low emissions New modern engine technolgy allows to decrease fuel consupmtion and reduce exhaust emission levels accordingly with current environmental regulations Primer Primer bulb instantly gives the first fuel flow to the carburettor allowing a quick start even after a long engine stop Side chain tensioner Placed on the machine side it allows to reach the chain housing with a simple tool and keep the tensioning avoiding any contact with the saw chain Softgrip handle Softgrip is a special rubber which protect the handle where it get holded while the machine is in use Absorbing part of the vibrations while augmenting the grip it makes more comfortable the use of your machine Specification Displacement 37 2cc Power Source Petrol 2 Stroke Bar Length 35cm14 inches Starter Easy start recoil Engine Net Power 1 2kW Bar Type Sprocket Nose Fuel Tank Capacity 0 4 Litres Handle Type Rear Handle £179.00 Available from: Agrigame UK Ltd New
view Lawn-King LKPBT3043 Auto Brushcutter details
Engine: 2 stroke 29.7cc
Power: 0.76kW
Half Crank Shaft: 26mm Straight
Handle: Loop
Trimmer Line: 460mm Width
Trimmer Blade: 230mm 4 Tooth 
Lawn-King LKPBT3043 Auto Brushcutter Lawn-King LKPBT3043 Auto Brushcutter Lawn King LKPBT3043 Auto Brushcutter AGLKPBT3043 Engine 2 stroke 29 7cc Power 0 76kW Half Crank Shaft 26mm Straight Handle Loop Trimmer Line 460mm Width Trimmer Blade 230mm 4 Tooth £169.90 Available from: Agrigame UK Ltd New
view Tondu TMT26-5 Multi-Tool details
Engine: 25.4cc 2 stroke single cylinder full crank
Shaft: 26mm Split
Handle: Loop
Includes: 700mm extension pole For hedgecutter and chainsaw attachment 
Tondu TMT26-5 Multi-Tool Tondu TMT26-5 Multi-Tool Tondu TMT26 5 Multi Tool AGTMT26 5 Engine 25 4cc 2 stroke single cylinder full crank Shaft 26mm Split Handle Loop Includes 700mm extension pole For hedgecutter and chainsaw attachment £199.00 Available from: Agrigame UK Ltd New
view Lawn-King LKFW45E Brushcutter details
Engine: 2 Stroke 45.4cc Kawasaki
Power: 1.42kW
Full Crank Shaft: 28mm Straight
Handle: Cowhorn
Trimmer Line: 460mm Width
Trimmer Blade: 230mm 4 Tooth 
Lawn-King LKFW45E Brushcutter Lawn-King LKFW45E Brushcutter Lawn King LKFW45E Brushcutter AGLKFW45E Engine 2 Stroke 45 4cc Kawasaki Power 1 42kW Full Crank Shaft 28mm Straight Handle Cowhorn Trimmer Line 460mm Width Trimmer Blade 230mm 4 Tooth £369.90 Available from: Agrigame UK Ltd New
view Lawn-King LKFW53E Brushcutter details
Engine: 2 stroke 53.2cc Kawasaki
Power: 2kW
Full Crank Shaft: 28mm Straight
Handle: Cowhorn
Trimmer Line: 460mm Width
Trimmer Blade: 230mm 4 Tooth 
Lawn-King LKFW53E Brushcutter Lawn-King LKFW53E Brushcutter Lawn King LKFW53E Brushcutter AGLKFW53E Engine 2 stroke 53 2cc Kawasaki Power 2kW Full Crank Shaft 28mm Straight Handle Cowhorn Trimmer Line 460mm Width Trimmer Blade 230mm 4 Tooth £399.90 Available from: Agrigame UK Ltd New
view Lawn-King HTW600 Wheeled Trimmer details
Cutting Width: 60cm/24"
Engine: Honda GCV160 160cc
Drive: Self Propelled 
Lawn-King HTW600 Wheeled Trimmer Lawn-King HTW600 Wheeled Trimmer Lawn King HTW600 Wheeled Trimmer AGHTW600 Cutting Width 60cm 24 Engine Honda GCV160 160cc Drive Self Propelled £799.90 Available from: Agrigame UK Ltd New
view Lawn-King PHT2660B Hedgetrimmer details
Engine: 26cc
Power: 0.65kW
Blade Length: 60cm 24" double sided
Cutting capacity: 24mm

Rear Handle Rotation, Anti-Vibration System 
Lawn-King PHT2660B Hedgetrimmer Lawn-King PHT2660B Hedgetrimmer Lawn King PHT2660B Hedgetrimmer AGPHT2660B Engine 26cc Power 0 65kW Blade Length 60cm 24 double sided Cutting capacity 24mm Rear Handle Rotation Anti Vibration System £169.90 Available from: Agrigame UK Ltd New
view Tondu TLRH26 Long Reach Hedgetrimmer details
Engine: Tondu 2 Stroke 26cc
Blade Length: 40cm Double Sided
Cutting Capacity: 30mm

Adjustable Shear Angle Up To 260 degrees 
Tondu TLRH26 Long Reach Hedgetrimmer Tondu TLRH26 Long Reach Hedgetrimmer Tondu TLRH26 Long Reach Hedgetrimmer AGTLRH26 Engine Tondu 2 Stroke 26cc Blade Length 40cm Double Sided Cutting Capacity 30mm Adjustable Shear Angle Up To 260 degrees £159.00 Available from: Agrigame UK Ltd New
view Eurosystems M85 Field Mower details
Cutting Width: 87cm/34" Cutting Bar
Engine: B&S Series 625 190cc
Drive: Self Propelled

Folding and Adjustable Handlebar. Optional Front Accessories 
Eurosystems M85 Field Mower Eurosystems M85 Field Mower Eurosystems M85 Field Mower AGM85 Cutting Width 87cm 34 Cutting Bar Engine B S Series 625 190cc Drive Self Propelled Folding and Adjustable Handlebar Optional Front Accessories £779.90 Available from: Agrigame UK Ltd New
Oregon Brow Guard & Visor Oregon Brow Guard & Visor Oregon Brow Guard Visor AGSAF20 £38.90 Available from: Agrigame UK Ltd New
Oregon Forestry Helmet Oregon Forestry Helmet Oregon Forestry Helmet AGSAF27 £37.25 Available from: Agrigame UK Ltd New
view ATVs & UTVs details
We can supply new or second hand ATV`s & UTV`s.
(Makes may vary depending on what is available.) 
ATVs & UTVs ATVs & UTVs ATVs UTVs We can supply new or second hand ATV s UTV s Makes may vary depending on what is available £1.00 Available from: Agrigame UK Ltd New
view Petrol Lawnmowers details
We can supply petrol push, self propelled or roller drive mowers made by Lawn-King, Rover, Harry, Castelgarden & Lawnflite. 
Petrol Lawnmowers Petrol Lawnmowers Petrol Lawnmowers We can supply petrol push self propelled or roller drive mowers made by Lawn King Rover Harry Castelgarden Lawnflite. 43093751 £999.00 Available from: Agrigame UK Ltd New
view Ride on Mowers details
We can supply side discharge, rear collection or outfront ride on mowers made by Lawn-King or Castelgarden.

 
Ride on Mowers Ride on Mowers Ride on Mowers We can supply side discharge rear collection or outfront ride on mowers made by Lawn King or Castelgarden. 43093751 £999.00 Available from: Agrigame UK Ltd New
top of page


  Request a catalogue
Cookies - our website uses cookies in order to work correctly and cookies for visitor statistics - by using this website you agree to accept the use of these cookies.

Agrigame UK Ltd,

British made luxury cushions featuring the Exotic Fruits collection of hand painted designs.